Precision Encoder Discs & Encoder Wheels
Precision Etched Components
Photochemical Machining
Etchit manufactures custom precision encoder discs, encoder wheels and related thin-metal components using photochemical machining. Our process is well suited for producing the fine slots, apertures and intricate patterns commonly required in optical and motion-control systems.
Photochemical machining allows complex encoder patterns to be produced without the mechanical stresses, burrs or tooling costs associated with conventional stamping. Because material is removed chemically rather than mechanically, even delicate features can be produced while maintaining the flatness and integrity of the original metal.
What Are Encoder Discs?
Encoder discs are precision components used to measure position, direction, speed or rotational movement. The disc typically contains a carefully designed pattern of slots, openings or other features that work with an optical or electronic sensing system.
Encoder discs are used in a wide range of equipment, including:
- Motors and motion-control systems
- Robotics and industrial automation
- Medical equipment
- Instrumentation
- Positioning systems
- Printers and imaging equipment
- Test and measurement devices
Depending on the application, these components may also be referred to as encoder wheels, code wheels, or optical encoder discs or encoder plates. Linear versions of similar patterns may be referred to as encoder strips or linear encoder scales.
Why Photochemical Machining for Encoder Discs?
Encoder components frequently combine very thin material with a large number of small, closely spaced features. This makes photochemical machining particularly well suited to their manufacture.
Unlike stamping, the photochemical machining process does not require hard tooling that can become costly when designs change. It also eliminates the mechanical forces that can distort thin material during conventional machining.
Compared with processes that introduce significant localized heat, chemical etching does not create a heat-affected zone.
The result is a process capable of producing:
- Fine slots and apertures
- Closely spaced repeating patterns
- Complex geometries
- Burr-free edges
- Stress-free features
- Thin and delicate components
- Multiple part geometries from the same sheet
- Prototype quantities through production volumes
Design changes can also be made relatively quickly because the photographic tooling used in the process is considerably less expensive and easier to modify than conventional stamping dies.
Etchit routinely processes encoders ranging from approximately .003″ to .020″ thick, depending on material, geometry and dimensional requirements.
For many encoder applications, stainless steel provides an excellent combination of dimensional stability, strength, corrosion resistance, and availability in very thin gauges.
Fine Features Without Burrs or Mechanical Distortion
The relationship between material thickness, feature size and dimensional tolerance is an important consideration when designing chemically etched encoder components.
Because the part geometry is created photographically and material is removed from both sides during etching, extremely detailed patterns can be repeated across an entire sheet without individually machining each opening.
This makes photochemical machining particularly attractive for encoder discs containing dozens—or even hundreds—of repeating slots and apertures.
Just as importantly, the process produces parts without stamping burrs or mechanical deformation. This can be especially valuable when the encoder must remain flat or operate with tight clearances between the disc and sensing components.
Prototype to Production
Photochemical machining provides flexibility throughout the life of an encoder design.
Prototype parts can be produced without investing in expensive production dies. If testing results in a design change, photographic tooling can often be revised much more economically than conventional hard tooling.
Once the design is finalized, the same fundamental process can be used for repeat production quantities.
This makes chemical etching well suited for both new encoder development and established production programs.
More Than Encoder Discs
In addition to round encoder discs and wheels, the same photochemical machining capabilities can be used to manufacture other thin-metal motion-control and sensing components, including:
- Encoder strips
- Linear scales
- Slotted discs
- Timing and sensing wheels
- Optical apertures
- Reticles and patterned plates
- Custom precision thin-metal components
If your component requires thin material, intricate geometry, numerous openings or closely spaced repeating features, photochemical machining may provide an economical alternative to stamping, laser cutting or conventional machining.
Talk to Etchit About Your Encoder Application
Every encoder design is different. Material thickness, slot width, spacing, tolerances, flatness and overall geometry all influence how the component should be manufactured.
Send Etchit your drawing, CAD file or specifications and our team can review the design for photochemical machining and help determine whether the process is a good fit for your application.
Ready to take the next step?
Request a Quote for Your Encoder Disc, Encoder Wheel or Precision Etched Component today!


